AUX AMCA-H09/4R1A, Руководство по обслуживанию

Страница: 129 / 142

AUX DC Inverter 1 Drive1 50HZ R410A Sensorresistance table
129
SWING button : Press this button for the first time when operation, it will start the swing function. Push
the button for the second time, cancel the swing function. (The function is available matched with the
concerned unit)
TIMER/CLOCK button :
Clock Setting: Normally display the clock set currently (display 12:00 for the first electrifying or
resetting). When press the button for 5 seconds, the time display zone will flicker, then press
【
+
】
and
【
-
】
button and to adjust hour that uses 12-
hour clock including “A.M.” and “P.M.” time; press the button
again to complete the setting.
Timer setting:
Press the button to set TIMER ON/OFF , press the button then “ON” will flicker on the
display screen. then press
【
+
】
and
【
-
】
button and to adjust hour that uses 12-hour clock including
“A.M.” and “P.M.” time; press the button again to complete the setting. The “OFF” setting is the same
methods.
Remark: When setting functions such as mode, temperature, air port and air velocity, display
screen displays all presetting parameters and remains constant; after reaching presetting time,
air conditioner will automatically start as per presetting state.
After setting timing ON and OFF function, pressing button o f
【
Timer/Clock
】
can cancel timing
setting.
SLEEP button :
1. Press the button to the sleeping indicator light of indoor unit flashes on;
2. After the setting of sleeping mode,the cooling operation enables the set temperature to increase 1
℃
after 1 hour and another 1
℃
auto matically after 1hour.
3. After the setting of sleeping mode,the heating operation enables the set temperature to drop 2
℃
after 1 hour and another 2
℃
auto matically after 1hour.
4. The air condition runs in sleeping mode for 7hours and stops automatically.
Remark: Press the mode or ON/OFF button,the remote controller clears sleeping mode away.
SCREEN button :Press the button to let the LCD display working or not by pressing the button.