Connections
Before any of the speakers can be connected with speaker wire, you will first need to install the floor stands
for each of the 4 floor standing speakers. To do this, follow the instructions below.
Sound Source Connection
01.
02.
03.
To create a pedestal, simply slide the
pedestal feet through their designated
pre-drilled holes in each of the four
corners of the speaker stand.
Next, with the provided screws, simply
twist the screws into the provided
pre-drilled holes until firm. Tighten only
enough to secure screws. If screws are
tightened too much, this could cause
fractures in the glass speaker.
When all the screws have been fit on,
double check each screw to make sure
they are firmly in place.
07
DVD
MODEL: HT50
MODEL: HT50
POWER CONSUMPTION: 150W
POWER CONSUMPTION: 150W
