Connections
Before Connecting The HT50 Speakers
Connect the front, center, and surround
speakers to the speaker output terminals
of the active subwoofer with the provided
speaker cables.
Connect each speaker making sure not to
reverse the polarity (+ / -). If the speaker
is connected with reverse polarity, the
sound will be unnatural and lack bass.
01. Strip the insulation from the end of each wire of the speaker cable. Twist the strands of the bare
wire tightly (see Figure A).
02. For the binding post, loosen the screw knob of the speakers input terminal and insert the wire into
the input terminal from below. Make sure that only the bare wire (and no insulation) is inserted
into the hole. Ensure that the wire is not touching the other terminal. Tighten the screw knob (see
Figure B).
03.
.
For the spring clip, press the spring clip of the speaker's input terminal and insert the bare wires
into the terminal hole. Release the spring clip and the wire is grabbed (see Figure C).
08
binding post
Springclip
Figure A Figure B Figure C
