General Operations
Standby Mode
After all the connections have been made, switch the Power Switch on
the rear of the subwoofer to the “On" position. The Standby indicator
on the front panel will light and the unit is now in the Standby mode. If
the Standby button on the remote, the indicator fades to black and the
front panel screen will display input condition "AUX" and then display
the words "M 40". This means the unit is now in working condition.
Pressing the Standby button again will cause the unit to go back into
the Standby mode.
Note: If the volume is larger than 65dB or smaller than 25dB, the master
volume will reset itself to the default of 40dB when back in Standby
mode.
10
MUTE
AUX INPUT
CD INPUT
Mute Feature
Press the Mute button to mute the sound. The display indicator will
blink. Press the Mute button a second time to resume normal sound.
The display will be solid.
Pressing Vol + and Vol - buttons will also resume normal sound. When
the Mute mode is exited, the volume will return to its original volume
level.
MUTE
AUX INPUT
CD INPUT
Subwoofer Volume
Press the SW.Vol +/- button to adjust the volue of mthe subwoofer. It
will display as "-10 ~ +10". Turn the "Master Volume" to its maximum
around M80. The maximum volume of the center speaker will show
"0dB" and the least it can reduce to "-10dB".
MUTE
AUX INPUT
CD INPUT
MUTE
