Service Commands
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 99
14.3.3 Output Control
The Ouput Control Menu deals with outputs controlling the following
units:
•
Door Control Units - controls and monitors fire doors.
•
Low Location Light Units - monitors and controls evacuation lights/
Low Location Light (Maritime application).
•
Standard Control Units - monitors and/or controls various external
equipment such as control of fire dampers, ventilation valves, fans,
lifts, plus fire and smoke hatches.
•
All outputs
The Output Control Menu allows authorized personnel to set
Automatic Control ON or OFF for selected units; Door Control Units,
Low Location Light, Standard Control Units or All Outputs. The default
value is ON.
14.3.3.1 Setting Automatic Control ON
The procedure shows how authorized personnel can set Automatic
Control ON for selected units; Door Control Units, Low Location Light,
Standard Control Units or All Outputs.
Step
Actions to be taken
Display Indication
1
To enter the Main Menu, press
!
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
2
To select SERVICE, press 5.
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 OIL&GAS INHIBIT
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 OIL&GAS INHIBIT
3
To select TEST, press 1.
SERVICE
TEST
1 DETECTION ZONE TEST (EN 54)
2 OUTPUT TEST
3 OUTPUT CONTROL
19:23
SERVICE
TEST
1 DETECTION ZONE TEST (EN 54)
2 OUTPUT TEST
3 OUTPUT CONTROL
19:23
www.ukpanels.com
