Autoscope Image Sensing IntelliSight Скачать руководство пользователя страница 91

Страница: 91 / 114

Chapter 6:

Supervisor Operations

Autoscope IntelliSight User Guide

6-7

Open Archive

This operation is initiated from the Home screen, and is used to open a

previously saved archive file and create an archive device in the device list. An

archive device is not connected to a real device and has a slightly different icon

to differentiate it from real devices.

Despite not being connected, users can navigate to other pages and view

archived contents specific to those pages. Users are not able to make changes

and save them back into the archive file.
To open an archive file, do the following.
1. On the Home screen, click

PEN

RCHIVE

2. When the Open window appears, locate and select the archive file (xxx.arch)

to be opened.

3. Click

Open

A new device appears in the device list on the Home screen.

Note

, since this

is not a real device, the communication icon (lightning bolt) will have a red

line through it.

Restore Archive

This operation is initiated from the Device screen, and is used to download the

contents of a previously saved archive file into the selected device.
If the model of the archive does not match the model of the device, then a

message will be displayed indicating that the archive cannot be restored.

NOTE:

Archives are not generally backwards compatible.

The settings that get restored are as follows:

Table 6-5: Archived Restored Settings

Setting

IntelliSight

Camera

IntelliSight

Processor

Detection configuration

Camera calibration

Zone setup, including output assignments and

any defined overlays

Device settings

User descriptions

Contrast loss

Содержание Image Sensing IntelliSight



















































































































Результаты поиска

Содержание Image Sensing IntelliSight

Отзывы:

Бренды по названию

Популярные бренды

Autoscope Image Sensing IntelliSight, Руководство пользователя

Результаты поиска

Содержание Image Sensing IntelliSight

Отзывы:

Бренды по названию

Популярные бренды