Autoscope Image Sensing IntelliSight, Руководство пользователя

Страница: 11 / 114

Chapter 1: Introduction
Autoscope IntelliSight User Guide ©2022 Image Sensing Systems Inc. 1-6
Power LED
The power LED (item 2 in Table 1-2 on page 1-3 ) indicates whether power is
applied to the IntelliSight Processor. The LED indicates the following:
•
Green: Power is good.
•
Red: The IntelliSight Processor is not in an operational state.
•
Yellow: Booting (may see a brief flash).
Ethernet Port LEDs
There are two LEDs associated with each RJ-45 port (items 6, 7, 8, 9 and 10) in
Table 1-2 on page 1-3 ) which indicate the speed of the network connection and
activity as follows:
•
Left LED (1000M): Green indicates a network speed of 1GB per second.
•
Right LED: Blinking green means there is activity on the Ethernet port.
IntelliSight Processor Status LED
When lit, this LED (item 3 in Table 1-2 on page 1-3 ) indicates the IntelliSight
Processor’s status.
•
Status LED
– Green: IntelliSight Processor is operating normally.
– Yellow: IntelliSight Processor is booting.
– Red: Failure.