Owner Installation Instructions
NeoSlider
TM
- Sliding Gate Opener NES-24V3
19
Fig 16.1
Fig 16.2
Technical Specifications
Protection rating:
IP33
Input voltage:
230V - 240V AC 50Hz
Transformer primary voltage:
230V/240VAC
Secondary voltage:
24V AC 150 VA
Controller voltage:
24V DC
Motor type:
Permanent Magnet Direct Current
Motor voltage:
24V DC
Maximum pulling force:
200N
Maximum gate opening:
1,
Width:
Weight:
10m
250kg
Opener maximum
Opening/closing run time:
30 seconds
Receiver type:
TrioCode™128
Receiver code storage capacity:
30 x 4 Button Transmitter Codes
Transmitter frequency:
433.47, 433.92, 434.37 MHz
Coding type:
Hopping Code
No. of code combinations:
Over 100 billion random codes
Code generation:
Non-linear encryption algorithm
Transmitter battery:
CR2032
NOTE:
1. The maximum gate size that the NeoSlider™ can be installed on is 10m wide and 250kg. The gate must be
well balanced. A person should be able to move the gate manually with very little effort (15kg force max.)
in case of an emergency.
2. Intermittent operations may occur in areas which experience very strong wind gusts. A strong wind puts
extra pressure on the gate and tracks which may in turn trigger the safety obstruction detection system
intermittently.
NOTE:
Specifications are subject to change without notice.
17. Specifications
