Owner Installation Instructions
NeoSlider
TM
- Sliding Gate Opener NES-24V3
29
Fig E.7
Fig E.8
E- Diagnostic Tools
F - Memory Tools
Fig F.1
Navigating To “Edit Transmitter” Menu
a. Press NEXT to navigate to Menu 1
(Fig. G.1)
.
b. Press SET to enter the transmitter edit procedure.
c. Press NEXT to enter transmitter list and edit mode.
Editing Button Function Field
a. Press NEXT or PREV to move the cursor to the left or right and
between the top and bottom lines to select the desired field.
b. Press UP or DOWN arrows to change the displayed value. The
available functions are shown below. Selecting OFF will prevent the
opener responding to that button.
Available functions
VAC (Vacation Mode)
LGT (Courtesy Light)
STP (Stop)
OPN (Open)
CLS (Close)
SWP (Swipe)
PED (Pedestrian access) OSC (Open/Stop/Close)
OFF (No action)
c. Press SET to save changes or press NEXT or PREV to move to the
next field. The example in
(Fig. G2)
shows that PED is assigned to
the transmitter button 2. The transmitter in the example is transmitter
number 12 which has the ID label AB Smith.
NOTE:
If all button functions are set to OFF, when SET is pressed, the
opener will prompt to confirm if the transmitter is to be deleted. Press
SET to delete or EXIT to continue editing.
Editing The Store Location
This feature is only available when coding the first button of a new
transmitter.
a. Press NEXT or PREV to move the cursor over Store No.
(Fig. G.3)
b. Press UP or DOWN arrows to select new Store No.
c. Press SET to Confirm or NEXT/PREV to move to the next field.
This is useful when managing transmitters using a scheme which ties the
store location to the transmitter’s owner.
Fig G.1
Fig G.2
Fig G.3
G- Transmitter Editing
Appendix
Menu 1
Code Transmitter
PRESS
12
ID
A B SMITH
OSC PED LGT VAC
PRESS
PRESS
14
ID
A B SMITH
OSC PED LGT VAC
PRESS
PRESS
