AUTOFLAME Mini Mk8 M.M., Руководство по установке и пусконаладке

Страница: 86 / 125

86
Figure 3.7.v Exit Single Point Change
退出单点更改
Once the adjustments have been made, go back to the Single Point Change home screen Figure 3.7.i
and press .
在完成数据调节后，回到单点更改主页屏幕（图示
3.7.i
）并按下 按钮。
Press to leave Single Point Change mode.
按下 按钮来退出单点更改模式。
The fuel flow commissioning must be entered (again) if the following changes are made in single
point change
如果操作者用“单点更改”做了以下操作，那么就必须进入燃料流量调试流程（再次）。

HIGH or START position is changed.
更改高火位置或启动位置

E.G.A. trim data has been added.
添加
E.G.A.
调节数据

Points have been added.
添加设定位
Please go to section 3.5 Fuel Flow Commissioning.
请参阅章节
3.5
燃料流量调试