AUTOFLAME Mini Mk8 M.M., Руководство по установке и пусконаладке

Страница: 69 / 125

69
3.4.11 Set INTER Position
设置中间位置
Figure 3.4.11.i Set INTER Position
设置中间位
Once the HIGH position has been entered, the message ‘Set INTER Position’ will appear. Press
to drive the servomotors (and VSD) to the first INTER position. There must be a
minimum of 0.5
O
gap between the positions entered on the fuel channel. Press to
store this INTER position.
在完成高火位置的输入后，控制模块屏幕将显示“设置中间位置”。按下 按钮并
且将伺服马达（和变速驱动）打开到第一个中间位。在燃料频道上输入的各中间位置之间必须
至少有
0.5
O
度的间隔。按下 按钮来保存中间位置。
There must be a minimum of 3 INTER points entered on the fuel-air curve, and a maximum of 18.
Points can be added in Single Point Change mode (see section 3.6).
燃料
–
空气曲线上的中间位至少为
3
个，至多为
18
个。可以在单点更改模式下添加中间位（参
见章节
3.6
）
.
Continue this process until all the required INTER points have been entered.
继续设置中间位的操作，直到所需的中间位全部都被输入。