Autodesk 003A1-121111-1001 - AutoSketch v.9.0, Начало работы

Страница: 95 / 130

Create a Round Table and Chairs
|
89
Now, place five chairs around the round table. Instead of creating each
chair individually, create one chair by rubber-stamping an existing chair.
Then, create a
circular array (a selection set arranged in a circular pattern)
of four chairs, arranging them around the table.
6 In the interior office space on the left side of the drawing, click the chair
that faces the other two chairs.
7 On the All-In-One toolbar, click Rubber Stamp. Then, drag the rubber-
stamped chair, and when the Absolute Coordinates dial reads 16.6", 9.6",
click to place the chair next to the round table. Then, right-click to end
the command.
Your drawing should match the following illustration.
8 Click the chair you just created to select it.