Autodesk 003A1-121111-1001 - AutoSketch v.9.0 Скачать руководство пользователя страница 63

Страница: 63 / 130

Add Dimensions to the Floor of the Birdhouse

You have just created the horizontal dimension. Now, move the dimen-
sion closer to the rectangle.

Click the dimension you just created.

Click and hold the green triangle at the top of the selected dimension, and
drag the pointer down until the dimension is closer to the rectangle.
Then, release the mouse button.

The dimension placement should look similar to the following
illustration:

The dimension should still be selected (you did not right-click to end the
command). You can now place the dimension on the Dimensions layer.

On the property bar, locate the Layer button. Click the arrow to the right
of the current layer, and then select Dimensions.

Click to the right of the dimension to deselect it.

Notice that the dimension is now red, the same color as the other dimen-
sions in this drawing.

Note

Now that the Dimensions layer is active, any entities you create are

placed on the Dimensions layer until you change the layer. You learn more
about how to change layers later.

Next, create the vertical dimension.

On the All-In-One toolbar, click and hold the Horizontal Dimension
button.

On the toolset, drag the pointer to select Vertical Dimension.

Содержание 003A1-121111-1001 - AutoSketch v.9.0



































































































































Результаты поиска

Содержание 003A1-121111-1001 - AutoSketch v.9.0

Отзывы:

Бренды по названию

Популярные бренды

Autodesk 003A1-121111-1001 - AutoSketch v.9.0, Начало работы

Результаты поиска

Содержание 003A1-121111-1001 - AutoSketch v.9.0

Отзывы:

Бренды по названию

Популярные бренды