Autodesk 003A1-121111-1001 - AutoSketch v.9.0 Скачать руководство пользователя страница 10

Страница: 10 / 130

Chapter 1

Installation

Add or Remove Features

You can add and remove features in AutoSketch at any time. For example, if
you chose a Custom installation when you first installed AutoSketch, you
you can add features not originally installed.

To add or remove features

In the Control Panel (Windows), start Add or Remove Programs.

In the Add or Remove Programs window, click AutoSketch Release 9, and
then click Change.

In the Setup wizard, Application Maintenance page, select the Modify
option, and then click Next.

On the Select Features page, select the features you want to add or remove,
and then select one of the following options:

■

Will Be Installed on Local Hard Drive.

Installs a feature or components

of a feature on your hard drive.

■

Entire Feature Will Be Installed on Local Hard Drive.

■

Entire Feature Will Be Unavailable.

Removes the feature.

Note

To revert to the AutoSketch features selected in your original

installation, click Reset.

Click Next.

On the Content Unit page, select one of the following, and then click
Next.

■

U.S. (Imperial) Content

■

Metric Content

On the Ready to Modify the Application page, click Install.

In the AutoSketch dialog box, click Finish.

If prompted, restart your computer.

Содержание 003A1-121111-1001 - AutoSketch v.9.0



































































































































Результаты поиска

Содержание 003A1-121111-1001 - AutoSketch v.9.0

Отзывы:

Бренды по названию

Популярные бренды

Autodesk 003A1-121111-1001 - AutoSketch v.9.0, Начало работы

Результаты поиска

Содержание 003A1-121111-1001 - AutoSketch v.9.0

Отзывы:

Бренды по названию

Популярные бренды