Autodesk 003A1-121111-1001 - AutoSketch v.9.0 Скачать руководство пользователя страница 9

Страница: 9 / 130

Install AutoSketch

Install AutoSketch

This section explains how to install AutoSketch on a stand-alone computer.

To install AutoSketch

Insert the AutoSketch CD into your CD-ROM drive.

Follow the installation prompts that are displayed.

If installation did not begin when you inserted the AutoSketch CD into your
CD-ROM drive, Autorun may be turned off on your machine.

To install AutoSketch if Autorun is turned off

Insert the AutoSketch CD into your CD-ROM drive.

On the Start menu (Windows), click Run.

In the Run dialog box, enter

<CD drive letter>

:\Setup.exe

and click OK.

Follow the installation prompts.

Congratulations! You have successfully installed AutoSketch. You are now
ready to register your product and start using the program.

Register AutoSketch

Registering AutoSketch makes you eligible for technical support and for early
notification of new product releases.

To register AutoSketch

On the Start menu (Windows), click All Programs (or Programs)

➤

Autodesk AutoSketch 9.

In the AutoSketch Product Registration wizard, select Register Now, and
then click Next.

Follow the on-screen instructions.

Содержание 003A1-121111-1001 - AutoSketch v.9.0



































































































































Результаты поиска

Содержание 003A1-121111-1001 - AutoSketch v.9.0

Отзывы:

Autodesk 003A1-121111-1001 - AutoSketch v.9.0, Начало работы, Страница: 9 / 130

Результаты поиска

Содержание 003A1-121111-1001 - AutoSketch v.9.0

Отзывы: