Autodesk 003A1-121111-1001 - AutoSketch v.9.0 Скачать руководство пользователя страница 11

Страница: 11 / 130

Repair AutoSketch

Repair AutoSketch

If you accidentally delete or alter files that are required by AutoSketch, it
might not perform correctly. You can attempt to repair AutoSketch.

To repair AutoSketch

In the Control Panel (Windows), start Add or Remove Programs.

In the Add or Remove Programs window, select AutoSketch Release 9, and
then click Change.

In the Setup wizard, Application Maintenance page, select the Repair
option, and then click Next.

On the Ready to Repair the Application page, click Finish.

If prompted, restart your computer.

Uninstall AutoSketch

When you uninstall AutoSketch, all components are removed from the
computer.

Note

Uninstalling the application does not automatically delete drawing files

you have created. You can delete those files manually.

To uninstall AutoSketch

In the Control Panel (Windows), start Add or Remove Programs.

In the Add or Remove Programs window, select AutoSketch Release 9, and
then click Remove.

In the message box that is displayed, click Yes to remove AutoSketch.

If prompted, restart your computer.

Содержание 003A1-121111-1001 - AutoSketch v.9.0



































































































































Результаты поиска

Содержание 003A1-121111-1001 - AutoSketch v.9.0

Отзывы:

Бренды по названию

Популярные бренды

Autodesk 003A1-121111-1001 - AutoSketch v.9.0, Начало работы

Результаты поиска

Содержание 003A1-121111-1001 - AutoSketch v.9.0

Отзывы:

Бренды по названию

Популярные бренды