Select Function
►
01) Oil Insp. Light
02) Set Insp. 1
03) Set Insp. 2
5)
Wait a few seconds till the following screen appears.
Oil Service
RESET OK!
Press any key to con.
z
If a message “Service reset failed!” comes up, repeat the
procedure from Step 3 or use Auto Detect to detect service
automatically.
z
If the message “Service reset failed!” does not go away,
9
Verify that the ignition is ON;
9
Check if the scan tool’s OBD II connector is securely
connected to the vehicle’s DLC;
9
Turn the ignition off and wait for about 10 seconds. Turn the
ignition back on.
z
If the scan tool still fails to perform oil service reset, contact
your local distributor or the manufacturer’s customer service
department for assistance.
33
