Main Menu
1) VW/Audi
2) OBDII/EOBD
►
3) Oil Service
4) System Setup
z
If the scan tool fails to communicate with the vehicle, a
“LINK ERROR!” message shows up on the display.
9
Verify that the ignition is ON;
9
Check if the scan tool’s OBD II connector is securely
connected to the vehicle’s DLC;
9
Turn the ignition off and wait for about 10 seconds. Turn the
ignition back on.
z
If the “LINK ERROR” message does not go away, then
there might be problems for the scan tool to communicate
with the vehicle. Contact your local distributor or the
manufacturer’s customer service department for assistance.
A.
Automatic Vehicle Detect
1)
Use
UP/DOWN
scroll button to select
All
, and press
Y
button.
Oil Service
►
1) All
2) Audi(up to 2000)
3) VW(up to 2000)
4) Seat(up to 2000)
5) Skoda(up to 2000)
z
All
option can be used to detect all VAG vehicles before and
after 2000 automatically.
20
