ID will be observed on the upper right hand corner of the
display.
z
If the code being displayed is a pending code, the
Pd
icon will
be observed next to the DTC number on the upper right hand
corner of the display.
z
When a DTC’s definition covers more than one display screen,
use the
Y
button, as necessary, to view any additional
information.
z
If the retrieved DTCs contain any manufacturer specific or
enhanced codes, you will be prompted to refer to the CD DTC
library or the vehicle service manual to view the DTC
definitions.
10)
If more than one DTC is found, use the
UP/DOWN
scroll buttons,
as necessary, until all the codes have been shown up.
Erasing Codes
1)
If you decide to erase the DTCs, use the
UP/DOWN
scroll
buttons to select
Erase Codes
from the
OBDII/EOBD DIAG.
menu and press the
Y
button.
OBDII/EOBD DIAG.
►
1) Read Codes
2) Erase Codes
z
If the scan tool is not connected or no communication is
established with the vehicle yet, then refer to
Reading Codes
from 1 to 8 at Paragraph 3.2.
2)
A warning message comes up asking for your confirmation.
18
