Erase Codes
Erase Trouble Codes!
Are you sure?
<YES> NO
3)
If you do not want to proceed with erasing the codes, press the
N
button to exit. A message of
“command cancelled”
will show up.
4)
If you do wish to proceed to erase the codes, then press the
Y
button.
5)
If the codes are cleared successfully, an “
ERASE DONE!
”
confirmation will show on the display. Press any button to return
to previous menus.
6)
If the codes are not cleared, then an “
ERASE FAILURE!
”
message will appear. Press the
N
button to return to previous
menus.
3.3
Oil Service
1)
Turn the ignition off.
2)
Locate the vehicle’s 16-pin Data Link Connector (DLC).
3)
Plug the OBDII connector to the vehicle’s DLC.
4)
Turn the ignition on. But do not start the engine.
5)
Press the
Y
button. The
Main Menu
will be observed on the
display.
6)
Use
UP/DOWN
scroll button to select
Oil Service
from the menu,
and press the
Y
button.
19
