3)
If you do not want to proceed with erasing the codes, press the
N
button to exit. A message of
“command cancelled”
will show up.
4)
If you do wish to proceed to erase the codes, then press the
Y
button.
5)
If the codes are cleared successfully, an “
ERASE DONE!
”
confirmation message will show on the display. Press any button
to return
to the previous menus.
6)
If the codes are not cleared, then an “
ERASE FAILURE!
”
message will appear. Press the
N
button to return to previous
menus.
Viewing ECU Information
1)
To view
ECU Information
, use the
UP/DOWN
scroll buttons
to select
ECU
Information
from
Select Function
menu and
press the
Y
button.
Erase Codes
Erase Trouble Codes!
Are you sure?
<YES> NO
Select Function
1) Read Code
2) Erase Code
►
3) ECU Information
4) Readiness Test
13
