6)
Use the
UP/DOWN
scroll buttons to select
VW/AUDI
from the
menu and press the
Y
button.
7)
Use the
UP/DOWN
scroll buttons to select the system from the
Select System
menu and press the
Y
button.
Main Menu
►
1) VW/Audi
2) OBDII/EOBD
3) Oil Service
4) System Setup
Select System
►
01) Engine
02) Auto Trans
15) Airbags
03) ABS Brakes
08) Auto HVAC
09) Cent. Elect.
z
If the scan tool fails to communicate with the selected
vehicle’s ECU (Electronic Control Unit), a “LINK
ERROR!” message shows up on the display.
9
Verify that the ignition is ON;
9
Check if the scan tool’s OBD II connector is securely
connected to the vehicle’s DLC;
9
Verify that the module is supported;
9
Turn the ignition off and wait for about 10 seconds. Turn the
ignition back to on and repeat the procedure from step 5.
z
If the “LINK ERROR” message does not go away, then
there might be problems for the scan tool to communicate
10
