AUSA M-50 x 4, Руководство по ремонту

Страница: 111 / 155

Section 03 ENGINE
Subsection 11 (GEARBOX)
03-11-12
VMR2004_134_03_11A.FM
GEARBOX
General
The only difference between gearbox of the Out-
lander 400 to 330 is the transmission ratio of gears
no. 22 and no. 29 (high range gear) .
During and after gearbox disassembly, inspect the
condition of each part closely. In particular, check for:
– gear teeth damage
– worn or scoured bearing surfaces
– worn or scoured shift fork
– worn or scoured shift fork shaft
– rounded engagement dogs and slots
– bent shift forks
– bent shift fork shaft
– worn shift fork engagement pins
– worn tracks on shift drum
– worn shift fork engagement groove
– worn splines on shafts and gears.
Removal
Remove output shaft.
Separate crankcase.
Remove:
– balancer shaft
– parking lever no. 7
– shift shaft no. 6
1. Parking lever
2. Shift shaft
– shift fork shaft no. 11
1. Shift fork shaft
– shift fork no. 12 .
1. Shift fork (engaged in main shaft gear)
Disengage shift fork no. 13 from shift drum no. 9 .
2
R400trans15A
1
1
R400trans16A
1
R400trans17A