36
GLASS CLEANING
After some period of operating time, due to normal condensation build up, which occurs
every time the heater is lit, some water marks and other stains may appear on the inside
surface of the glass. To clean the door glass follow the sequence on Page 9 and Page 10 -
Log Installation to open the main door. To polish the glass and remove the haze we suggest
a moist cloth or car cut and polish. This is not covered under warranty. Do not use abrasive
or caustic solutions to clean the main door glass. Please note: Stains or imperfections on the
door glass are not covered under warranty.
Caution: Do not attempt to remove side panels unless main power is switched off.
Do not attempt to open the main door of the heater and clean the door glass
whilst the heater and the glass are hot.
GOLD PLATED/CHROME PLATED/STAINLESS STEEL DOORS
The gold and chrome plated finish on the door requires little maintenance and needs only to
be cleaned with a soft cloth and a small amount of Mr Sheen. Polish gently. Stainless Steel
doors can be cleaned with a metal cleaner that can be used on Stainless Steel.
Please note: Stains or imperfections on plated finishes are not covered under warranty.
Caution: Do not use abrasive materials or chemical cleaners as they will harm the
gold and chrome plated finish and void the warranty.
Clean any fingerprints off before turning the unit on.
GLASS REPLACEMENT
Your Archer Gas Log Space Heater is supplied with a high temperature 5mm Neoceramic
safety glass that will withstand the highest heat that your unit will produce.
In the event that you break your glass by impact, purchase your replacement from an
authorised Archer dealer only.
CHILDREN AND ADULTS SHOULD BE
ALERTED TO THE HAZARDS OF HIGH
SURFACE TEMPERATURE AND SHOULD
STAY AWAY TO AVOID BURNS OR
CLOTHING IGNITION. YOUNG CHILDREN
SHOULD BE CAREFULLY SUPERVISED
WHEN THEY ARE IN THE SAME ROOM AS
THE APPLIANCE. ALWAYS ENSURE THAT
YOUR SAFETY SCREEN SUPPLIED WITH
THE HEATER IS FITTED TO THE MAIN
FRONT DOOR OF THE HEATER.
!
ANY SAFETY SCREEN OR GUARD
REMOVED FOR SERVICEING THE
APPLIANCE MUST BE REPLACED PRIOR
TO OPERATING THE APPLIANCE.
!
CLOTHING OR OTHER FLAMMABLE
MATERIAL SHOULD NOT BE PLACED
ON OR NEAR THE APPLIANCE
!
