background image

TO THE NEW OWNER

 

Congratulations! You are the owner of a state of the art Archer High Efficiency Gas Log Space Heater. 
 
This  appliance  has  been  designed  to  provide  you  with  all  the  warmth  and  charm  of  a  wood  fire  at  the  flick  of  a 
switch. The Archer Gas Log Space Heater promises to provide you with the highest economy, heat output, comfort 
and security. 
 
NOTE: AURORA WARRANTY PROGRAM 
Please note to qualify for the Aurora Warranty Program, you need to fill out the warranty registration form, and have 
your qualified installer fill out the Installation Commissioning Report. Both documents must be returned promptly to 
Aurora Climate Systems. 
 
Under new government legislation, you also need to obtain from your qualified installer, a Certificate of Compliance 
for the guarantee of the installation. 
 
Please note, that Aurora Climate Systems will not accept responsibility for faults with the appliance caused through 
installation  faults.  We  therefore  strongly  recommend  that  you  return  to  Aurora  Climate  Systems  the  Installation 
Commissioning  Report  and  obtain  a  Certificate  of  Compliance  from  your  qualified  installer  for  your  protection.  
Failure to do so can void your warranty. 
 
Please  take  a  moment  now  to  acquaint  yourself  with  the  instructions  and  many  features  of  your  Archer  High  
Efficiency Gas Log Space Heater. 
 
Warranty - Installation - Service 
 
(Listing and Code Approvals) 
This appliance has been tested in accordance with SAI Global to code AS4553 Test Approval No. GSCS20025, and 
has been certified to the Electrical AS3100 standard. 
 
Check with your local council’s building department to ensure compliance with local codes, including the need for 
permits and follow up inspections. Or if you wish clarification of the instructions contained in this manual, please 
contact Aurora Climate Systems on telephone (03) 9795 8895 or facsimile (03) 9701 2088. 
 

Note: 

As  the  Archer  Gas  Log  Space  Heater  you  have  purchased  is  a  high  tech,  high  efficiency   

 

appliance, 

we wish to advise that your appliance should at all times only be installed by a licensed Gas

 

Fitter / Installer for the installation and service of the Archer Gas Log Space Heater. 

 
 

At  no  time  should  this  appliance  be  installed  outside  the  installation  guide  lines  contained  in  the  

 

Installation Manual, or by a non qualified gas fitter / installer. To do so will void the warranty. 

 
 

It is policy of Aurora Climate Systems that should a fault develop in the Archer Gas Log Space  Heater  during 

 

its warranty period, Aurora will repair the appliance in these circumstances. However we wish to advise that  

 

should the Archer Gas Log Space Heater develop a fault in its operation  because the product was not installed 

 

in  accordance  with  the  manufacturer’s  guidelines  and  instructions,  or  if  the  product  was  not  installed  

 

correctly by a licensed gas fitter / installer or lack of operating knowledge of the appliance by the customer 

 

causing appliance failure, then a service charge will apply. 

 
 

In such cases, where attendance is required by Aurora Service Personnel to correct faults in the product which 

 

are not directly related to the product and / or parts failure but are the result of improper installation and lack 

 

of  operating  knowledge  of  the  appliance,  Aurora  Climate  Systems  will  charge  the  purchaser  of  the  

 

appliance and the installer / service agent a fee calculated on the basis of  $120.00 Call out fee including first 

 

30 min + GST then $45 per 30min, as well as travelling expenses in excess of 25 km each way to rectify such 

 

faults. 

 

Note: 

The Complete Unit Warranty, inclusions, exclusions, terms and conditions are listed on pages 37 to 39 

 

of this manual.  

Содержание Archer IS700

















































Отзывы: