background image

3

LKS 

- S2 24V DC

01

Index of abbreviations

These abbreviations are used consistently throughout these assembly 
& operating instructions. Unless stated differently, all dimensions indi-
cated in this document are in mm. General tolerances in accordance 
with DIN ISO 2768-m.

A

drive

AK 

connection cable / drive cable

AP

cover cap

BD

hinge

Fxxx

casement bracket

FAB

overall width of casement

FAH

overall height of casement

FG

casement weight

FL

casement

casement overlap

HSK

main closing edge

Kxxx

frame bracket

L

construction lenghth of drive

MB

central hinge

NSK

side closing edge

RA

frame

RAB

overall width of frame

RAH

overall height of frame

SL

snow load
opening direction

a

bbReViationS

Failure to comply with the warning notes results  
in irreversible injuries or death.

Failure to comply with the warning notes can re-
sult in irreversible injuries or death.

Failure to comply with the warning notes can re-
sult in minor or moderate (reversible) injuries.

Failure to comply with the warning notes can lead 
to damage to property.

w

aRning

 

anD

 

Safety

 

SymbolS

 

in

 

theSe

  i

n

-

StRuCtionS

:

The symbols used in the instructions shall be strictly observed and have 
the following meaning:

Caution / Warning

Danger due to electric current.

Caution / Warning

Risk of crushing and entrapment during device operati-
on (is provided as a sticker with the drive).

Attention / Warning

Risk of damage to / destruction of drives and / or 
windows.

!

w

aRning

!

D

angeR

!

C

aution

n

ote

!

These instructions are intended for trained personnel 
and operators of systems for natural smoke ventilation
(SHEVS) (smoke and heat exhaust ventilation system) and 
natural ventilation via windows, who are knowledgeable 
of operating modes as well as the remaining risks of the 
system.

This device is not intended for use by per-
sons (including children) with physical, 

sensory or mental limitations or lacking experience and / or 
knowledge, unless they are supervised by a person who is 
responsible for the safety or were instructed on the usage 
of this equipment. Children should be supervised to ensure 
that they are not playing with this device. 
Cleaning and operator’s maintenance may not be per-
formed by children without supervision.

t

aRget

 

gRouP

!

w

aRning

RA

FL

FAB

FA

H

BD

HSK

NSK

NSK

RAB

R

A

H

Once the assembly and commissioning 
has been completed, the installer of a 

machine „power-operated window“ shall hand these ins-
tructions over to the end-user. 
The end-user shall store these instructions in a safe place 
over the whole lifecycle and use it for further reference, if 
required. 

!

w

aRning

P

reliminary

 r

emark

Содержание LKS S2 24V DC





























Отзывы: