manualshive.com logo in svg

AUMA SVC 05.1, Руководство по эксплуатации

Поделиться
Скачать
AUMA SVC 05.1 Скачать руководство пользователя страница 21

Figure 16: Ground connection

Earth connection (U-bracket), external

5.6.

Accessories for electrical connection

5.6.1.

Local controls mounted on wall bracket

— Option —

The wall bracket allows separate mounting of local controls and actuator.

Application

If the actuator cannot be accessed safely.

Figure 17: Actuator with local controls on wall bracket

[1]

Wall bracket

[2]

Local controls

[3]

Phoenix connector with connecting cable

Observe prior to connec-

tion

●

Permissible length of connecting cables: max. 30 m.

●

We recommend: AUMA cable set K008.218 (5 m).

●

A retrofit kit is available for actuators without wall bracket.

●

Local controls on wall bracket are not approved for use in Ex zone 22.

●

Establish cable connection via plug/socket connector as illustrated.

Information

Do NOT connect 19-pin signal plug (from DCS) to socket for local controls on wall

bracket.

21

SVC 05.1 – SVC 07.5/ SVCR 05.1 – SVCR 07.5 

Electrical connection

Содержание SVC 05.1

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды