Appendix
COMfortel WS-500S/500M - Advanced Information V03 10/2020
37
•
Each mobile device must be registered on the Integrator/DECT Manager.
– Start by selecting
Settings > Mobile devices > Administration
in the
Web configurator on the COMfortel WS-500S/WS-500M. On the page that
is then displayed, click the
Register now
button.
– Confirmation on the mobile device
Note:
Both must be performed within 3 minutes.
Note:
You will find more information in the help for the COMfortel WS-
500S/500M Web Configurator.
Enabling Additional Base Stations (only COMfortel WS-500M)
•
Each additional connected base station, found by the Integrator/DECT
Manager, must be activated in the Integrator/DECT Manager.
– Perform configuration on the
Settings > Base stations > Administration
page in the Web configurator on the COMfortel WS-500M
Appendix
LEDs (Light-Emitting Diodes)
The LEDs on the front face indicate different operating states according to what
the device is currently doing. The LEDs can shine in three different colours (red,
blue or green), or are off (here: empty table row).
COMfortel WS-500S
VoIP provider
Previously assigned name of the PBX profile
LED 1 (left)
LED 2 (right)
Description
0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s
Switched off
Red
Red
The device is booting
Blue
Blue
Firmware update is
running
Red
Red
No LAN connection or no
IP address available/
assigned
Blue
Green
DECT ready
Blue
Green
DECT data traffic
