ATX DigiVu Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 96

ATX DigiVu Скачать руководство пользователя страница 82

CHAPTER 12: FIRMWARE UPGRADE & RECOVERY

12-2

DigiVu

®

Series Multichannel MPEG-2/H.264 Encoder/Multiplexer with QAM &/or IP Output - Installation & Operation Manual

•

Channel parameters are not changed.

12.2.3 Username and Password Reset File

It is possible to reset a lost username and password without losing the programmed configuration. A special file is available to

reset the username and password back to factory defaults (username: atx, password: atx). This file must be requested from

ATX Networks technical support.

12.3 Identifying Current Firmware Version

The currently installed firmware version is displayed in the DigiVu GUI

under the ‘Maintenance’ tab, as shown in Figure 12-1.

12.4

Exporting a Configuration

The DigiVu has the ability to export the programmed configuration as

a file, which could be kept as a backup or used for mass deployment

of a common configuration. It is suggested to export the configuration

prior to upgrading firmware but the exported settings may not be used

to restore after a firmware upgrade since system settings may be

incompatible between firmware versions. The settings file may only be

restored to a DigiVu with the same version firmware as the unit from which it originates. Making this backup is not service

affecting and it is recommended that the settings be exported and saved whenever the DigiVu system configuration changes.

The settings file is exported from the ‘Maintenance’ tab. Figure 12-2 illustrates what to do.

NOTE:

If a firmware upgrade is undertaken, it will not be possible to use an exported configuration

made as a backup since features introduced in the newer firmware will render the backup file from
a previous firmware version incompatible. A backup taken will only be of use on a DigiVu with a
firmware version the same as the version from which it is taken, ie. if the firmware is ever reverted
back to the original version.

Only use exported configuration files on a DigiVu of identical

firmware version.

Figure 12-1:

Identify the Current Firmware Version

Figure 12-2:

Export Your Configuration

«
...
80
81
82
83
84
...
»

Содержание DigiVu

































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды