ATX DigiVu Скачать руководство пользователя страница 70

Страница: 70 / 96

CHAPTER 10: DEMOD & MUX SETTINGS TAB

10-8

DigiVu

Series Multichannel MPEG-2/H.264 Encoder/Multiplexer with QAM &/or IP Output - Installation & Operation Manual

10.8.4 Bit Rate Margin

This is the margin or headroom detected in the incoming stream. This allows some small change in the aggregate bit rate of

all of the TS programs without exceeding the QAM channel maximum bit rate.

10.8.5 Null Packets Bit Rate

The transport stream may not contain all MPEG stream data. If the analyzer detects null stuffing, it displays the data rate of

the nulls here.

10.8.6 Transport Stream Total Bitrate

This is the bit rate of the QAM channel. In the case illustrated above, a QAM-B 256 QAM channel with a data rate of 38811

kbps.

10.8.7 Program Components

Each program listed in the stream PAT and PMT

tables will be displayed along with their assigned

MPEG program number. Each program is further

broken down into it’s components:

10.8.8 PMT Table

The table that announces the PID assigned to

each individual elementary stream; the Audio and

Video streams. The PMT table is contained within

it’s own data stream with a PID assigned

•

PMT PID
The PID assigned to the PMT table.

This cannot be changed.

•

PMT Bit rate
The bit rate of the PMT table. Information

only.

10.8.9 ES Type=13818-2 Video

The stream analyzer will determine the video

stream type and display it here. In this example

the stream is detected as 13818-2 Video. The

number 13818-2 is the standard that defines MPEG-2 video. If your system carries different video, this will reflect the video

detected. ES means Elementary Stream. Each program stream is comprised of one or more elementary streams.

•

ES PID
The PID assigned to the Video Elementary Stream.

•

ES Bit Rate
The bit rate of the Video Elementary Stream in kbps. In the illustrations, the actual bit rate displayed is the total of the

payload data rate specified by the standard plus header packets

10.8.10 ES Type=ATSC_AC_3 Audio

The stream analyzer will determine the audio stream type and display it here. In the example illustrated the stream is detected

as AC-3 Audio. If your system carries different audio, such as MPEG-1, the analyzer will reflect the audio stream type detected.

ES means Elementary Stream. Each program is comprised of one or more elementary streams.

•

ES PID
The PID assigned to the Audio Elementary Stream.

•

ES Bit Rate
The bit rate of the Audio Elementary Stream in kbps. In the illustrations, the actual bit rate displayed is the total of the

payload data rate specified by the standard plus header packets.

Figure 10-15:

Showing Program Components in PID Display Tree

Содержание DigiVu

































































































Результаты поиска

Содержание DigiVu

Отзывы:

Бренды по названию

Популярные бренды

ATX DigiVu, Руководство по установке и эксплуатации

Результаты поиска

Содержание DigiVu

Отзывы:

Бренды по названию

Популярные бренды