Ethernet Management Connection
The 100/1000BASE-T Ethernet ports provide remote
monitoring and
management using the ATTO XstreamVIEW™
System Manager.
When you connect an Ethernet cable between the
XstreamCORE and a 100/1000BASE-T connection, you may
need a crossover cable connecting directly to a computer.
The ATTO XstreamCORE auto detects the Ethernet speed by
default.
It is recommended to use a good quality Cat 5e or
better cable
Serial port connection
The ATTO XstreamCORE supports remote service operations
over the RS-232 serial port using standard terminal emulation
software available with most systems.
Connect a RJ45 to DB-9 serial cable (null modem) between
the ATTO XstreamCORE serial port and one of the computer's
serial COM ports.
A gender changer or DB-9 to DB-25 converter may be needed
depending on the cables being used.
