10
SPRINTER MOBIL - HYMAX PRO 08.12.2015 20110005 OPI
5
Operating manual
When handling the system, it must ab-
solutely comply with safety regula-
tions. Carefully read the safety regula-
tions in Section 3 before irst operation!
To prevent operation by unauthorized
people, secure the main switch (2) af
-
ter working height has been reached.
Operating element
007
2 Main switch
3 „LIFT“ button
4 „LOWER“ button
For SPRINTER MOBIL - HYMAX PRO lifts,
the motor of the vehicle supported
must always be on the ixed bearing
side, otherwise the vehicle could fall.
The total centre of mass of the
vehicle and its load must be between
100 mm and 600 mm away from the ixed
bearing towards the middle of the lift,
otherwise the vehicle could fall.
Slowly drive the vehicle to the middle in both the
lengthwise and crosswise directions over the drive-
in rails.
Vehicle with front-wheel drive:
008
Vehicle with rear-wheel drive:
009
3
2
4
