Atlas 12AWFSL, Руководство по установке и эксплуатации

Страница: 42 / 82

Operation And Use 42 12AWFSL
Lift operation can be summarized into following steps:
8.2 To Raise Runways
• Position the vehicle at the center of the runways. Check to make sure that
the vehicle is secured;
• Set the power switch to 1 position;
• Set the main/jack selector to MAIN position;
• Press the lifting button to raise the vehicle;
• To rest the runways in standing position at the desired height by releasing
the lifting button;
• Push the safety button to engage the mechanical safeties.
8.3 To Lower Runways
• Be sure the safety area is free of people and objects;
• Raise the runways a little bit by pushing the lifting button to clear off the
mechanical safeties;
• Press the lowering button: the runways will take seconds to release the
safeties and then begins to descend lower under its weight and the load lifted;
• Keep pressing the lowering button until the runways are lowered to the
safety height;
• Press the fi nal lowering button until the runways are lowered completely.
A beep sound is heard during the last travel.
8.4 Raising The Wheel Free Jacks
• Place the rubber blocks under the picking point at the car. Adjust jack table
extensions according to vehicle to lift if necessary;
• Check to make sure that the vehicle is secured;
• Place pads under the positions indicated for lifting, by the motor vehicle’s
manufacturer;
• Set the main/jack selector to the position ;
• Press the lifting button to lift the vehicle to the required height;
• To rest the jacks in standing position at the desired height by releasing the
lifting button;
• Push the safety engaging button to engage the mechanical safeties.