Safety
26
12AWFSL
6.5
Risk Of The Vehicle Falling From The Lift
Vehicle falling from the lift can be caused when the vehicle is improperly placed
on platforms, and when its dimensions are incompatible with the lift or by
excessive movement of the vehicle.
In this case, keep immediately away from the working area.
6.6 Slipping
Risks
The risk of slipping can be caused by oil or dirt on the
fl
oor near the lift.
Keep the area under and around the lift clean. Remove all oil spills.
6.7 Electrocution
Risks
Avoid use of water, steam, and solvent, varnish jets in the lift area where electric
cables are placed and, in particular, next to the electric panel.
6.8
Risks Resulting From Improper Lighting
Make sure all areas next to the lift are well and uniformly lit, according to local
regulations.
6.9
Risks Of Breaking Component During Operation
Materials and procedures, suitable for the designed parameters
of the lift, have been used by the manufacturer to build a safe
and reliable product. Operate the lift only for the use it has been
designed for and follow the maintenance schedule shown in the
chapter “Maintenance”.
Содержание 12AWFSL
Страница 1: ...Replace This With Cover PDF ...
Страница 16: ...Technical Specification 16 12AWFSL Figure 3A Layout For In Ground Installation ...
Страница 17: ...Technical Specification 17 12AWFSL Figure 3B Layout For On Ground Installation ...
Страница 21: ...Technical Specification 21 12AWFSL Figure 6 Electrical Plan 220V 1Ph ...