Atlas Copco XAS 130 DD7 C3 APP, Инструкция по эксплуатации

Страница: 81 / 116

- 81 -
AIR RECEIVER
The air receiver is tested according to official
standards. Carry out regular inspections in conformity
with local regulations.
DRIVE BELT
(XAS 67 - XAS 130, XATS 67 - XATS 125)
SAFETY VALVE
Following checks must be carried out:

a check of the opening of the lifting gear, twice a
year. This can be done by screwing the cap of the
valve anti-clockwise.

an annual check of the set pressure according to
local regulations. This check cannot be done on
the machine and must be carried out on a proper
test bench.
FUEL SYSTEM
Replacing the filter element
1. Unscrew the filter element (1) from the adapter
head.
2. Clean the adapter head sealing surface. Lightly oil
the gasket of the new element and screw the latter
onto the header until the gasket is properly seated,
then tighten with both hands.
3. Check for fuel leaks once the engine has been
restarted.
Never retighten or reuse the drive belt
between engine and compressor.
Consult Atlas Copco for replacement of
drive belt.
All adjustments or repairs are to be done
by an authorized representative of the
valve supplier.
(1)