Atlas Copco XAS 130 DD7 C3 APP, Инструкция по эксплуатации

Страница: 47 / 116

- 47 -
Operating instructions
PARKING, TOWING AND LIFTING
INSTRUCTIONS
Safety precautions
Attention
PARKING INSTRUCTIONS
Non-adjustable towbar with standard support leg without
brakes
Adjustable towbar with jockey wheel and brakes
(A) Parking position of jockey wheel (adjustable towbar)
(B) Rear-end of compressor upwind
When parking a compressor, secure support leg (1) or
jockey wheel (2) to support the compressor in a level
position. Be sure that the jockey wheel (2) is blocked
by the blocking pin (4).
Apply parking brake by pulling parking brake handle
(3) upwards. Place the compressor as level as
possible; however, it can be operated temporarily in
an out-of-level position not exceeding 15°. If the
compressor is parked on sloping ground, immobilize
the compressor by placing wheel chocks (available as
an option) in front of or behind the wheels.
Locate the rear-end of the compressor upwind away
from contaminated wind-streams and walls. Avoid
recirculation of exhaust air from the engine. This
causes overheating and engine power decrease. Do
not obstruct air evacuation from the cooling system.
The compressor oil lifetime will be shortened when
the compressor inlet air is contaminated.
The operator is expected to apply all
relevant Safety precautions for portable
compressors with generator.
Before putting the compressor into use,
check the brake system as described in
section Brake shoe adjustment.
After the first 100 km travel:
Check and retighten the wheel nuts and
towbar bolts to the specified torque. See
section Compressor / engine
specifications.
Check the brake adjustment. See section
Brake shoe adjustment.
When using a towing vehicle to
manoeuver the unit, take care that the
jockey wheel is lifted maximally.
When the jockey wheel is on the ground,
the unit may only be manoeuvered by
hand.
(1)
(2)
(3)
(4)
(2)
(2)
(A)
(B)