Atlas Copco XAS 130 DD7 C3 APP, Инструкция по эксплуатации

Страница: 65 / 116

- 65 -
Maintenance schedule (running hrs)
(continuation of page 64)
Daily 50 hrs after initial
start-up
Every 500 hrs Yearly
Check/Fill fuel level (3) x
Check air intake vacuum indicators x
Check on abnormal noise x
Check for leaks in engine-, compressor-, air-, oil-, or fuel system x x x
Check torque on critical bolt connections x x x
Hoses and clamps - Inspect/Replace x x x
Check electrical connections x x x
Check electrical system cables for wear x x x
Drain/Clean fuel tank water and sediments (1) x x
Check functioning of regulating valve x x
Check electrolyte level and terminals of battery x x
Check engine (minimum and maximum) speed x x
Replace compressor oil filter(s) (5) x x
Change engine oil (2) x x
Replace engine oil filter (2) x x
Replace fuel (pre)filters (6) x x
Clean flow restrictor in oil scavenge line x x
Grease hinges x x
Replace bleed-off valve unloader x x
Clean after cooler (option) (1) x x
Replace DD/PD/QD filter (option) x x
Change compressor oil (1) (7) x x
Clean oil cooler(s) (1) x x
Replace air filter element (1) x x
Inspection by Atlas Copco service technician x x
(to be continued on page 66)