Atlas Copco QAS 60 Pd, Инструкция по эксплуатации

Страница: 53 / 142

- 53 -
Passwords
Changing different parameters requires different
password levels. Some parameters cannot be changed
by the end-customer because of safety reasons.
There are 3 different password levels:
– User password (default setting 2003)
– Service password
– Master password
Once the password has been entered, the user can
change all the accessible set points.
The user can change the User password (go with
JUMP button to channel 9116).
Languages
English is the default language ex-factory.
Changing parameters
Consult the Qc4002™ MkII user manual for all
customer level parameters, which can be accessed
using password "2003".
In order to receive the default parameters for your
unit, please contact Atlas Copco Service staff.
4.4.4.4 Standard modes
The unit has four different running modes and one
block mode. The required mode can be selected via
the MODE puhbutton. Repeat pushing the button
until the required mode appears on the display, then
press SEL to select or BACK to cancel.
This screen appears when pressing the MODE
puhbutton.
Auto mode
In this mode the Qc4002™ MkII controls the gen-set
and the circuit breakers (generator breaker GB and
mains breaker MB) automatically according to the
operational state.
Semi-Auto mode
In semi-auto mode the operator has to initiate all
sequences. This can be done via the pushbutton
functions, modbus commands or digital inputs. When
started in semi-automatic mode, the gen-set will run
at nominal values.
Test mode
Enables the user to test the generator on a regular
basis. The generator will follow a predefined
sequence of actions.
In this mode it is possible to perform the following
tests:
– Simple test
– Load test
– Full test
Manual mode
When manual mode is selected, the generator
frequency and voltage can be controlled with external
inputs.
When operating in AUTO mode the
STOP and GB Open/Close button
will not function.
!
MAN mode cannot be selected,
when AUTO mode is selected. To go
from AUTO to MAN it is necessary
to go to SEMI-AUTO to make MAN
available.
!