- 31 -
Engine pages
These pages contain engine instrumentation,
measured or derived from the module’s inputs, some
of which may be obtained from the engine ECU.
– Engine Speed
– Engine Run Time
– Engine Battery Volts
– Engine Coolant Temperature
– Engine Oil Pressure
– Engine Fuel Level / Flexible Sensor
– Engine Maintenance Due – Oil
– Engine Maintenance Due – Air
– Engine Maintenance Due – Fuel
Info pages
These pages contain information about the controller.
– Module’s date and time
– Scheduler settings
– Product description and USB identification
number
– Application and Engine Version
Engine DTC (ECU alarms)
This page contains active Diagnostic Trouble Codes
(DTC), if the engine ECU generates a fault code. The
alarm conditions are detected by the engine ECU and
displayed by the Qc1111™/Qc2111™ controller.
1
Icon to indicate that the scheduler is currently
displayed
2
Start time of scheduled run
3
Day and week of scheduled run
4
Duration of scheduled run
1
3
2
4
1
Number of DTC displayed out of number of active
DTCs
2
Icon to indicate that the event log is currently
displayed
3
Description and fault code of active DTC alarm
4
Icon to indicate the type of DTC fault that is
active
5
Current operating state of the module
6
SPN and FMI fault code of active DTC alarm
Check engine
Low - moderate
458852, 18, 126
SPN
458862
FMI
0
3
4
5
6
2
1
