44
4 - SETTING THE TEMPERATURE
Before taking any action, light up the screen by pressing a button.
4.1 - Setpoint temperature
To change the setpoint temperature, use
/
.
By default, the setpoint temperature is set at 19°C
(recommended temperature) and can be changed within the
range of 12°C to 28°C.
Use the consumption indicator to optimise your settings.
When the consumption indicator is alongside the green
symbol, your temperature setting is lower or equal to the
recommended temperature.
A minimum of 6 hours are required for the temperature in a
room to stabilise.
Depending on your installation, you might get a different
temperature reading from that displayed on your appliance. In this
case, refer to the "Expert Mode" - "Temperature calibration" chapter.
Frost Protection position
(Plinth version without Auto Mode)
Use this function when you are absent for more than 48 hours.
Regardless of the mode selected, to activate Frost Protection press
until 7.0°C is displayed.
When you return, set the setpoint temperature again to return to
normal operation.
5 - OPERATING MODES
Before taking any action, light up the screen by pressing a button.
Choose the operating mode that is most suitable for your requirements.
3 modes are proposed in the Horizontal and Vertical versions and 2 modes in the Plinth
version (Basic and Prog):
