40
2.5.1 - Set the language
Change the language using
/
and confirm with
OK
.
You will be able to access the language setting later via the Expert
mode menu (refer to the "Expert mode menu" chapter)
2.5.2 - Setting the date and time
Change the date using
/
and confirm with
OK
. Proceed in the
same way for the month, the year, the hour and the minutes.
You will be able to access the date and time settings later.
By default: the transition to daylight saving time is automatic.
You can disable the transition to daylight saving time (refer to the
"Expert mode menu" chapter).
2.5.3 Appliance status
By default, when first switched on,
y
AUTO mode is selected in the Horizontal and
Vertical versions, (refer to the "Operating mode"
chapter),
y
Prog mode is selected in the Plinth version.
y
The setpoint temperature is set at 19°C.
y
The detection functions are activated (refer to
the "Detection functions" chapter). For the Plinth
version, only the "Open window" detection function
is activated.
y
The maximum decrease in temperature (when
you are not present) is 3°C from the setpoint
temperature (refer to the "Operating mode"
chapter).
