33
1 - INSTALLING THE APPLIANCE
1.1 - Installing the appliance
Your appliance is delivered with its own hanging bracket. However, the
choice of screws and of wall plugs depends on the nature of your wall
and you are responsible for ensuring that you use screws and wall plugs
that are adapted to the weight of the appliance.
Once the you have removed the appliance from its cardboard box, you
can remove the hanging bracket, which you can use as a hole drilling
template.
To make connecting it up easier, this appliance (horizontal and low
version) has been designed to stand in place while it is being connected.
In the case of a Vertical appliance, be sure to place the appliance in its
shim against the wall until it has been positioned on the hanging bracket.
1.1.1 - Installation rules
This appliance has been designed to be installed in a residential room.
The installation must be carried out implementing best practices and in
accordance with the current standards in the country of installation (NFC
15100 for France). Its operating range is from -10°C to 55°C.
Install the appliance 12cm above floor level and observe the minimum
distances from furniture when positioning the appliance (refer to the
diagram).
Do not install a shelf above a vertical appliance.
Horizontal and Plinth model
Vertical model
15
15
12
50
50
dimensions in cm
12
50
30
15
dimensions in cm
60 cm
60 cm
3 m
Volume
1
Volume
2
60 cm
2,25
m
Volume
0
dimensions in cm
If you have a wall lining applied on
foam, you will need to place packing
behind the radiator mounting frame
with the same thickness as the foam
to maintain a clear space behind the
radiator so that its regulation is not
disturbed.
