Atag iC 24, Инструкция по установке и обслуживанию

Страница: 52 / 62

Installation & Servicing instructions ATAG iC-Range
52
16.1 Flow restrictor
If required the fl ow restrictor can be removed as follows:
- Turn off the mains water supply to the boiler
- Open a hot water tap to depressurise the hot water pipe
- Remove the boilers front cover and turn down the control unit
- Remove the securing clip (1) to the left
- Pull out the fl ow restrictor plug (2)
- Remove the fl ow restrictor (3) using a long nose plier
- Refi t the plug (2) and secure it with the securing clip (1)
- Turn on mains water inlet and purge water through all taps
- Replace the boilers front cover.
16.2 Component replacement
In the event that parts require replacement, use only genuine parts supplied by ATAG Heating
Technology Ltd.
16.3 User's instructions
Advise the user that for continued effi cient and safe operation, the boiler should be serviced at least once a
year by qualifi ed servicing company. It is important and strongly recommended that arrangements are made
for a maintenance agreement with a qualifi ed servicing company to ensure regular servicing of the boiler.
Please contact ATAG Heating Technology Ltd. for further details. Contact details can be found on the back
page of this manual.
16.4 Warranty
For the warranty conditions we refer to the Warranty Card that is supplied with the boiler.
1
2
3