Asyril SmartSight Скачать руководство пользователя

Страница: 12 / 50

SmartSight

Operating Manual

Description

Version: C

000.100.530

12/50

Detail detection

Detail localisation

¼ px accuracy

Table 2-3: Detection limit

The pixel-millimetre conversion depends on the field of view as well as the resolution of the camera.

This value is resumed in Table 2-1 for each vision kit.

2.2.2. General specifications

2.2.2.1. Control unit

The control unit is delivered with OS and software configured and ready to be used. The Cognex dongle

key, delivered in the package, has to be connected all the time to allow correct function of the system.

Figure 2-4: control unit

Characteristic

Value

Dimensions [mm]

See Figure 2-20

Power supply

24VDC / 75 W

Windows protection

The Control Unit (partition C) is protected with the EWF from

WindowsEmbedded. When enable, the Control Unit can be turned off without

shutdown (No UPS is needed). Any changes on the partition C: will be erased

at the next restart of the pc.

Note that the partition D: is not protected, as recipes must be saved on it. For

this reason, switching off the control unit during, or close after, a recipe saving

operation might corrupt the data.

Backup

The system partition and the data directory of the Control Unit are saved on a

CF card placed inside the control unit. This backup can then be used to restore

as fast as possible the system in case of a system failure (Harddisk failure). A

backup is created at delivery time and can be launched manually at any time.

Содержание SmartSight



















































Результаты поиска

Содержание SmartSight

Отзывы:

Похожие инструкции для SmartSight

Бренды по названию

Популярные бренды

Asyril SmartSight, Руководство по эксплуатации

Результаты поиска

Содержание SmartSight

Отзывы:

Похожие инструкции для SmartSight

Бренды по названию

Популярные бренды