Asyril SmartSight Скачать руководство пользователя

Страница: 43 / 50

SmartSight

Operating Manual

Transportation, handling and installation

Version: C

000.100.530

43/50

Transportation, handling and installation

3.1.

Product packaging, transportation and handling

The product must be transported in accordance with the specifications indicated on the package (top,

bottom, fragile, etc.). In addition, the following points must be strictly respected:

IMPORTANT!

Take adequate precautions during handling.

Do not climb on the package.

Never place heavy objects on the package.

Take particular care to avoid damaging the product during transportation.

3.2.

Unpacking instructions

Before unpacking, please check the condition of the ShockWatch label. In order to ensure a problem-

free delivery, all Asyril products are dispatched with this label. This label contains an indicator that

breaks if the package is mishandled. If the content of this indicator is red at the time of delivery:

(A)

Ask the transporter to be present at the time of unpacking.

(B)

Pay particular attention to the external condition of the product.

(C)

If any damage is noted, do not sign the receipt and contact Asyril

immediately.

(D)

In all cases, indicate the condition of the ShockWatch label on the

delivery note.

Figure 3-1: ShockWatch

NOTE:

If the products received do not match your delivery note, or are delivered in poor condition, do not sign

the receipt and contact Asyril as soon as possible.

3.3.

Installation and storage environment

3.3.1. Installation environment

The SmartSight system must be used under the following conditions:

Work temperature: +5°C to +40°C

Pay particular attention to dust: the system must be used in a clean environment.

Avoid exposing the system to direct light radiation that is too intense. Failure to respect this

instruction may result in poor operation of the vision recognition system.

Humidity: from 30% to 85% max. without condensation.

IMPORTANT!

In cases of extreme humidity, please note that the performance of the component supply may be

impaired. In addition, for humidity levels below 30%, electrostatic forces may disrupt the behaviour of

the parts.

Содержание SmartSight



















































Результаты поиска

Содержание SmartSight

Отзывы:

Похожие инструкции для SmartSight

Бренды по названию

Популярные бренды

Asyril SmartSight, Руководство по эксплуатации

Результаты поиска

Содержание SmartSight

Отзывы:

Похожие инструкции для SmartSight

Бренды по названию

Популярные бренды