Asyril SmartSight Скачать руководство пользователя

Страница: 7 / 50

SmartSight

Operating Manual

Description

Version: C

000.100.530

7/50

Description

2.1.

Product overview

SmartSight describes Asyril’s intelligent visual part detection system, ensuring straightforward

integration of any Asycube flexible feeder with any industrial robot brand. It makes the implementation

of high performance flexible feeding system as simple as setting up conventional feeders.

Capable of controlling up to 4 cameras and feeders, SmartSight is able to control the part movements,

ensuring their optimal separation and distribution on the platform. The location of the parts to be picked

is then provided to the robot or industrial controller via Ethernet. The system can be easily programmed

thanks to Asyril’s intuitive user interface.

Figure 2-1: SmartSight: How it works

SmartSight

comprises Asyril’s powerful visual part detection and feeder management software installed

on an industrial PC (1) as well as an optimally configured Asycube (2) and vision kit (3) including

camera and objective as well as all necessary cabling (see Figure 2-2 for a general illustration of the

SmartSight content).

The basic configuration contains one camera over one asycube. However the system is built to allow

more complex configurations with several cameras and feeders that can, or not, work independently

and which parameters (recipe) can be saved and loaded on a common basis. Alternative configurations

for functionalities such as control part presence, position in gripper, placing position are available on

demand. Some standard configurations are described in this document (see 2.3.1 Diagrams of basic

configuration).

Содержание SmartSight



















































Результаты поиска

Содержание SmartSight

Отзывы:

Похожие инструкции для SmartSight

Бренды по названию

Популярные бренды

Asyril SmartSight, Руководство по эксплуатации

Результаты поиска

Содержание SmartSight

Отзывы:

Похожие инструкции для SmartSight

Бренды по названию

Популярные бренды