SmartSight
Operating Manual
© Copyright Asyril S.A.
Description
Version: C
000.100.530
32/50
2.4.3. Vision Kit
The CAD model of the vision kit can be downloaded on the Asyril webpage. The method for integrating
the vision kit with the asycube is described in Figure 2-22.
Figure 2-22: Vision kit integration
WD
The 3D model of the vision kit is composed by the camera, objective
and the conus which represents the working distance (WD) and the
field of view (FoV). The lighting (L) is not part of the 3D vision kit, for
further information see 2.5.1.
Pay attention that the field of view is defined as the inner edge of the
plate frame.
The WD is the distance between the front face of the objective and
the asycube plate. The integrator ensures that the position of the
vision kit can be mechanically adjusted in a tolerance of -10mm/
+30mm.
For positioning the vision kit onto the asycube, place the face centre
of the conus (A) on the plate centre (B)
(A)
(B)
W
D
-
1
0
/+
3
0
(L)
