AstroNova QuickLabel QL-850 Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 127

background image

Safety Warnings and Precautions

QL-850 User Guide

118

Caution

•

There are high voltage points inside the printer. To avoid a fire or electrical shock, never
attempt to disassemble or repair the printer.

•

Never insert or drop any metal objects into the printer when it is open. This could cause
a fire or serious electrical shock, or damage the printer. If something falls into the printer
accidentally, switch the printer off immediately, disconnect the power plug from the power
source, and call for service. If you continue to use the printer, this could cause a fire or
serious electrical shock.

•

If the printer is dropped and damaged, switch the printer off immediately, disconnect the
power plug from the power source, and call for service. If you continue to use the printer,
this could cause a fire or serious electrical shock.

•

To avoid a fire or electrical shock, never use flammable sprays around the printer.

•

Never remove the fixed covers from the printer. This could cause a serious electrical
shock.

Important

•

While the printer is printing, do not open any covers and do not remove the power plug.

•

Do not apply excessive force or strong shock to the printer. Doing so can result in a
machine failure or impair printer quality. Be sure to open/close the covers slowly.

Moving the Printer

Warning

•

Call the dealer for advice before you ship the printer a long distance or move the printer
by car or truck where it may be subjected to shock and vibration. Moving the printer
without the proper preparation could subject it to shocks and vibrations which could
damage the printer and cause a fire.

Caution

•

Before moving the printer, use the appropriate procedures to drain ink from the printhead
or entire print system. The Before Moving and Before Shipping features are located in the
Cleaning tab of the QL-850 Maintenance Utility. Refer to the QL-850 Driver Help for
details.

•

Before you move the printer to another location in the same building, disconnect the
power cord and make sure that all other cables are disconnected.

•

The printer is heavy and moving it requires two people. One person should lift the front
by the indicated lift point, while the other person should lift the back by the indicated lift
point. Do not lift the printer by the mandrel. Lift the front of the printer by the recessed

«
...
116
117
118
119
120
...
»

Содержание QuickLabel QL-850
































































































































Отзывы:

Нет отзывов

Похожие инструкции для QuickLabel QL-850

M39 Dosatron TE

Бренд: La Cimbali Страницы: 50

Бренд: La Cimbali Страницы: 15

the Barista Pro BES878

Бренд: Sage Страницы: 28

Barista Express BES875

Бренд: Sage Страницы: 36

Minuto HD8661/09

Бренд: Saeco Страницы: 68

Бренд: Officine Gullo Страницы: 12

Бренд: Barazzoni Страницы: 2

Бренд: SOLAC Страницы: 36

Intuition Preference EA87 Series

Бренд: Krups Страницы: 154

PAIN ET TRESORS

Бренд: TEFAL Страницы: 164

Бренд: CTM Страницы: 187

Бренд: BRAYER Страницы: 52

Бренд: BOMANN Страницы: 28

Бренд: Water Well Страницы: 5

Xelsis DELUXE SM8780

Бренд: Saeco Страницы: 858

Бренд: Clatronic Страницы: 39

Бренд: Swift Страницы: 17

Бренд: Unic Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды