AstroJet M1DX, Руководство оператора

Страница: 78 / 97

SECTION 4
MAINTENANCE
72
Shipping or Transporting Printer
If you have to ship or transport Printer for any reason, unit will have to be prepared.
Once Printer is prepared, carefully package Printer, Printhead Cartridge, Service Station
and Ink Tanks in original packaging.
Deprime System
1. Open Toolbox . Click
“Service”
drop-down menu.
Select
“Bottom Unit”
and
“System Deprime”
.
( Depriming forces all ink to return to Ink Tanks .)
Remove Printhead Cartridge
1. Lower Duplex Feeder. Open Side Door on Duplex Printer.
Unlatch and pull out Print Engine. Press the Printhead Latch
Release Button
[1] . Printer pumps any ink in system back into
Tanks. Then the Printhead Latch pops open [2] .
NOTE: Perform this same function from your computer
by clicking “Printhead Release” on User Interface screen
in Printer Toolbox
.
CAUTION
DO NOT PRY OR MANUALLY LIFT PRINTHEAD
LATCH OR LATCH MAY BREAK. ONLY OPEN
LATCH USING PRINTER'S RELEASE BUTTON
OR PRINTHEAD RELEASE COMMAND IN
PRINTER TOOLBOX.
2.
Make sure Printhead Latch is fully opened to retract ink lines.
Remove Printhead Cartridge by tilting it toward ink lines
[3] ;
then carefully lift it out of Printhead Compartment.
3. Pack Printhead Cartridge area with absorbent towels to catch
any ink drips or spills.
Carefully pack Cartridge using original packaging.