AstroJet M1DX, Руководство оператора

Страница: 41 / 97

SECTION 2
ASSEMBLE/INSTALL PRINTER
35
Setting up Feed
Set up the Top Printer as you would normally ( See Top Printer Operator Manual for correct procedure .)
To set up the Duplex Printer for double-sided or single-sided printing:
Double-sided Printing:
1. Duplex Feeder [A] is in the raised position and magnetically
attached to the exit end of the Top Printer .
2. In the Print Driver , make sure the Duplex Settings are selected
in the General tab.
3. Position the Drop Tray or Conveyor
(
See Install Drop Tray or Conveyor ).
Single-sided Printing:
1. Duplex Feeder [A] is in the lowered position.
2. In the Print Driver , make sure the Duplex Settings are
turned OFF in the General tab.
3. Position the Drop Tray or Conveyor ( See Install Drop Tray or Conveyor ).